Many pedestrians or bystanders are injured in forklift-related accidents. These injuries can occur when forklifts strike pedestrians or when pedestrians are struck by falling loads. When there are multiple workers and forklifts moving about the dock, forklift traffic, and pedestrian safety are issues that go hand in hand. That’s why it’s necessary for employees to take pedestrian safety seriously and what can be done to avoid the several hazards that put both pedestrians as well as operators at risk.

Forklift operators should always be aware of conditions in their workplace, including pedestrian traffic.

Potential Hazards:

• Danger of striking pedestrians and objects

Requirements and Recommended Practices:

• Yield right of way to pedestrians

When a person or group of people walks across your planned route:

• Stop
• Wait until the pedestrian(s) pass by
• Proceed cautiously through any congested area

If an area is cluttered, walk the route first to spot problems:

• Warn pedestrians by asking them to move, if there is not sufficient safe clearance

• Sound the horn at blind corners, doorways and aisles

• Sound the horn or other alarm when you back up

Reminders for the Driver:

• Slow down, stop and sound horn at intersections, corners, and wherever your vision is obstructed
• Do not move the forklift if you do not have a clear view of travel (Travel in reverse if the freight obstructs your view.)
• Always look in the direction of travel
• Start, stop, travel, steer and brake smoothly
• Signal to pedestrians to stand clear
• Do not allow anyone to stand or pass under the load or lifting mechanism
• When possible, make eye contact with pedestrians or other forklift operators
• Never drive your forklift up to a pedestrian
• Remember to keep fork blades raised 2-4 inches while traveling on the dock
• When backing out of a trailer, always come to a complete stop at the end of the trailer...Look in both side directions
• and behind you before backing out of the trailer onto the dock

Reminders for Pedestrians:

• Be aware that forklifts cannot stop suddenly as they are designed to stop slowly to minimize load damage and maintain stability

• Stand clear of forklifts in operation
• Avoid a run-in since the driver's visibility may be limited due to blind spots
• Be aware of the wide-rear swing radius
• Use pedestrian walkways, if available (Avoid high traffic areas such as in front of loading doors.)
• Never pass under an elevated load
• Avoid entering a confined area while a forklift is in operation
• Be cautious around loading doors as forklifts may be backing out